News Center
CCS grade E marine grade steel plate data sheet:
| CCS grade E marine grade steel plate Specification | According to client's need |
| Technique | Hot rolled, TMCP |
| Density | 7.85 g/cm ³ |
| Additional Condition | Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, UT, The Third Party Test (such as SGS Test) |
CCS grade E marine grade steel plate chemical composition:
| Grade | C % | Si % | Mn .Min% | P % | S % | C+Mn/6 |
| ABS grade E | 0.18 | 0.10-0.35 | 0.7 | 0.035 | 0.035 | 0.4 |
CCS grade E marine grade steel plate mechanical property:
| Grade | Yield Strength (Mpa) | Tensile Strength | Elongation in8 in.[200mm] | Elongation in8 in.[200mm] | Impact Energy | Test Temperature(°C) |
| (MPa) | (%) | (%) | (J) | |||
| ABS grade E | ≥235 | 400-520 | ≥21 | ≥24 | 27 | -40 |
CCS grade E marine grade steel plate features:
CCS grade E marine grade steel plate is the common tensile strength steel. It has good toughness properties, strong corrosion-resistance, good processing properties and welding properties. The air rolled and Control Rolled are common rolling states for CCS grade E marine grade steel plate with equal and below 40mm thickness. And for CCS grade E marine grade steel plate whose thickness above 40mm, the heat treatment shall be Normalised or TMCP, so as to improve the CCS grade E marine grade steel plate strength.
CCS grade E marine grade steel plate application:
CCS grade E marine grade steel plate is used primarily in shipbuilding, ship repair and other marine applications.
BBN steel cooperated with LR, DNV, CCS, ABS, BV, GL, NK, KR, RINA and RMRS to do the third party inspection to promise quality of CCS grade E marine grade steel plate and so on shipbuilding steel materials.
Technical Requirements & Additional Services of CCS grade E marine grade steel plate:
1)High tension test
2)Z-Test (Z15, Z25, Z35)
3)Low temperature impact test
4)Ultrasonic Test under ASTM A435, A577, A578
5)Cetificated by ABS, LR, GL, BV, DNV, KR, NK, CCS, RINA, etc. classification society
6)Issued Orginal Mill test certificate under EN10204 FORMAT 3.2
7)Shot blasting and Painting, Cutting and welding as per end user’s demands
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
