News Center
Hull structural steel plate ABS grade EH36 belongs to 400MPa low alloy structural steel. In addition to primary carbon, some alloying elements are added to ABS grade EH36 steel, such as Si, Mn, Cr, Mo, Nb, Ti, V, etc. How about hull structural steel plate ABS grade EH36 properties?
Hull structural steel plate ABS grade EH36 properties - chemical composition:
| Grade | C % | Si % | Mn % | P % | S % | Al(acid soluble),min% | Cb | V | Ti | Cu | Cr | Ni | Mo |
| ABS grade EH36 | 0.18 | 0.10-0.50 | 0.90-1.60 | 0.035 | 0.035 | 0.015 | 0.02-0.05 | 0.05-0.10 | 0.02 | 0.35 | 0.2 | 0.4 | 0.08 |
Hull structural steel plate ABS grade EH36 properties - mechanical property:
| Grade | Thickness(mm) | MinYield(Mpa) | Tensile(Mpa) | Elongation (%) | Min Impact Energy | |
| ABS grade EH36 | 8mm-50mm | Min 355Mpa | 490-620Mpa | 21% | -40 | 34J |
| 51mm-70mm | Min 355Mpa | 490-620Mpa | 21% | -40 | 41J | |
| 71mm-100mm | Min 355Mpa | 490-620Mpa | 21% | -40 | 50J | |
| The min impact energy is longitudinal energy | ||||||
Hull structural steel plate ABS grade EH36 is widely used to manufacture important stressed and high stressed parts and important components of main hull in low temperature water area. For example: the corner of cargo hold on the main deck of the ship; the hatch top plate and stiffener; the four vertical plates in the crane base structure; the outer plate of rudder arm structure, etc. Hull structural steel plate ABS grade EH36 is used in the above important parts to ensure the normal navigation of the ship in the cold navigation area and prevent the risk of cracks caused by cold brittleness due to high stress.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
