News Center
JIS S45C mild steel round bar and flat is a medium strength steel. S45C mild steel round bars are suitable for shafts studs, keys etc. Available as rolled or normalized, JIS S45C mild steel is supplied as square bar, or round bar or flat. BEBON will offer JIS S45C mild steel round bars and JIS S45C mild steel flats with direct price.
JIS S45C Mild Steel Equivalents:
DIN Equivalents for JIS S45C: C45, CK45, CF45, CQ45
ASTM Equivalents for JIS S45C: ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682
SAE Equivalents for JIS S45C: SAE J403 , SAE J412 , SAE J414
AISI Equivalents for JIS S45C: AISI 1045, AISI 1046
EN Equivalents for JIS S45C: EN-8 / BS 970 080M40
S45C Mechanical Properties:
Density (kg/m3) 7700-8030
Young's Modulus (GPa) 190-210
Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
Poisson's ratio 0.27-0.30
S45C Hardness Brinell Hardness (HB): 160-220 (Annealed)
JIS S45C Mild Steel Chemical Composition:
Carbon (C) 0.42% – 0.48%
Silicon (Si) 0.15% – 0.35%
Manganese (Mn) 0.6% – 0.9%
Phosphorus (P) 0.030% Max
Sulphur (S) 0.035% Max
JIS S45C Mild Steel Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 - 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C
If you are looking for JIS S45C mild steel round and flat bars, BEBON will be a good JIS S45C Mild Steel partner.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
