News Center
AB/EH32, ABS EH32,GL-D32 steel plate sheet is mainly used for shipbuilding and oil platform.
Henan BEBON International co., Ltd can supply steel grade AB/AH36, AB/DH36, AB/EH36, AB/FH36, AB/AH32, AB/DH32, AB/EH32, AB/FH32, ABS GRADE A, ABS GRADE B, ABS GRADE D, ABS GRADE E. AB/AH40, AB/DH40, AB/EH40, AB/FH40 and AB/EH32, ABS EH32, EH32 and GL-D32 .
GL-D32 steel chemical composition(% by max): C:0.18, Si:0.50, Mn:0.90-1.60, P&S:0.035, Al:0.015, Ti:0.02, Cr:0.20, Mo:0.08, Ni:0.40, Cu:0.35.
GL-D32 shipbuilding steel mechanical properties: Yield strength 315MPa,tensile strength 440-570MPa, elongation 22%.
GL-D32 steel is a good material for shipbuilding in deck. GL-D32 Grade is in -40 impact test of 34J energy.
The delivery condition of GL-D32 is as followings:
Grade |
Fine grains elements | category | The thickness of steel | |||||
| ≤ 12 | >12.5-20 | >20-25 | >25-35 | >35-50 |
>50-100 |
|||
| DH32 | Nb+V or V | Plate/ sheet |
A(50) | N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||
| Profile steel | N(50),CR(50),TM(50),AR*(25) |
- |
||||||
| Al or Al+Ti | Plate/ sheet |
A(50) | AR*(25) |
- |
||||
| N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||||||
| Profile steel | A(50) | N(50),CR(50),TM(50),AR*(25) |
- |
|||||
Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.
Henan BEBON International co., Ltd offers GL-D32 steel material directly from our mill with the competitive price and the best quality.
About GL-D32 detail information��please visit our website http://www.shipbuilding-steel.com .
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
