News Center
The shipbuilding angle steel plate grade D40 is the high tensile strength steel.D40 shipbuilding angle steel is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.
D40 shipbuilding angle steel Plate Dimension, Thickness: 5-300mm, Width: 1500-3200mm, Length: 3000-12000mm
D40 shipbuilding angle steel Technique: Hot Rolled
Surface Treatment: Shop Primer, Galvanized, Coated
D40 shipbuilding angle steel Chemical composition in percent by weight [%]
C : is less than or equal to 0.18 Si: 0.1~0.5 Mn: 0.9~1.6 S : is less than or equal to 0.035 AL: is less than or equal to 0.015 P : is less than or equal to 0.035 Cr : is less than or equal to 0.2
D40 shipbuilding angle steel Mechanical properties:
D40 shipbuilding angle steel plates have yield strength of 56,500 psi (390 MPa), and ultimate tensile strength of 74,000 - 94,500 psi (510-650 MPa). All the D40 shipbuilding angle steel offered by Bebon International can be certificated by Det Norske Veritas (DNV).
D40 shipbuilding angle steel Application: D40 shipbuilding angle steel plates are mainly used for making the offshore oil drilling platform, the hull of ship building and ship repairing, the platform pipe joints and other components.
BEBON is specialized in supplying D40 shipbuilding angle steel, any need in D40 shipbuilding angle steel ,pls contact us! or send Email to [email protected]
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
