News Center
ABS DH36 plate material belongs to higher strength structural steel for ships. ABS DH36 higher strength structural steel is available in plate, sheet, bars and profiles. Welcome to visit our factory for ABS DH36 structural steel plates and ABS DH36 structural steel shapes for ships building.
ABS Structural Steel Plates Manufacture:
Plates in all thickness ordered to Grade E shall be normalized, or thermo-mechanical control processed. Plates over 1 3/8 in. [35mm] in thickness ordered to Grade D shall be normalized, control rolled, or thermo-mechenical control processed.
ABS structural steel plates in all thickness ordered to Grades EH32 and EH36 shall be normalized, or thermo-mechanical control processed. Plates in all thickness ordered to Grade EH40, FH32, FH36, and FH40 shall be normalized, thermo-mechanical control processed, or quenched and tempered. Plates ordered to Grades AH32, AH36, AH40, DH32, DH36, and DH40 shall be normalized, control rolled, thermo-mechanical control processed, or quenched and tempered when so specified.
ABS DH36 Chemical Requirements
Chemical Composition (heat analysis, % max.by mass unless otherwise specified):
|
Grade |
C |
Si |
Mn (Min) |
P |
S |
Cr |
Mo |
Ni |
Cu |
Cb |
V |
|
DH36 |
0.18 |
0.10/0.50 |
0.90/1.60 |
0.035 |
0.035 |
0.20 |
0.08 |
0.40 |
0.35 |
0.02/0.05 |
0.05/0.10 |
Note: Grain refining requirements apply to still this steel grade.
ABS DH36 Tensile Requirements:
|
Grade |
Yield Point[Re], min |
Tensile strength[Rm] |
Elongation |
|
|
In 2 in.[50mm] |
In 8 in.[200mm] |
|||
|
ksi[MPa] |
ksi[MPa] |
min, % |
min, % |
|
|
DH36 |
51[355] |
71/90[490/620] |
22 |
19 |
If you are looking for ABS DH36 higher strength structural steel for shipbuilding, please contact us.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
